Copying Functions
4-18 OPERATION GUIDE
File Name Entry
Names a copy job. Add other information such as date and time or job number as necessary. You can check a
job history or job status using the job name, date and time, or job number specified here.
Use the procedure below to assign a name to your copy job.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press the Function Menu key. Function Menu
appears.
4 Press the U or V key to select [File Name Entry].
5 Press the OK key. File Name Entry appears.
6 Enter the file name, press the OK key. Additional
Info. appears.
NOTE: Refer to Character Entry Method on Appendix-
5 for details on entering characters.
7 Enter the date, job number, etc. on the screen, and
then press the OK key.
NOTE: Refer to Character Entry Method on Appendix-
5 for details on entering characters.
Completed. is displayed and the screen returns to
the basic screen for copying.
8 Press the Start key to start copying.
Function Menu:
a
b
*********************
2
Collate
T
3
Duplex
T
[ Exit ]
File Name Entry:
A
b
File_2009
*
S
ABC
[ Text ]
To Next Page
Loading...