Utax CD 1128 - Switching Unit of Measurement

Default Setting (System Menu)
OPERATION GUIDE 8-27
8
Switching Unit of Measurement
Select inch or metric for the unit for paper dimensions.
Use the procedure below to change the input units.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Measurement].
4 Press the OK key. The Measurement menu
appears.
5 Press the U or V key to select [inch] or [mm].
6 Press the OK key. Completed. is displayed and the
screen returns to the Common Settings menu.
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
Common Settings:
a b
*********************
2 Default Screen
3 Sound
[ Exit ]
Measurement:
a b
*********************
2 mm