Default Setting (System Menu)
8-58 OPERATION GUIDE
Auto Paper Selection
If [Auto] is selected for Paper Selection, set the paper size selection method when the zoom changes. The table
below shows the available settings.
Use the procedure below to specify the action performed for Auto Paper Selection.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Copy].
2 Press the OK key. The Copy menu appears.
3 Press the U or V key to select [AutoPaperSelect.].
4 Press the OK key. AutoPaperSelect. appears.
5 Press the U or V key to select [MostSuitableSize]
or [Same as OrigSize].
6 Press the OK key. Completed. is displayed and the
screen returns to the Copy menu.
Auto % Priority
When a paper source of different size from the original is selected, select whether automatic zoom (reduce/
zoom) is performed.
Item Description
MostSuitableSize Select paper based on the current zoom
and the size of the original.
Same as OrigSize Select paper that matches the size of the
original, regardless the zoom.
Sys. Menu/Count.:
a
b
*********************
8
Printer
9
Send
[ Exit ]
Copy:
a
b
*********************
2
Paper Selection
3
AutoPaperSelect.
[ Exit ]
AutoPaperSelect.:
a
b
*********************
2
Same as OrigSize
To Next Page
Loading...
Need help?
General
