Default Setting (System Menu)
8-78 OPERATION GUIDE
Use the procedure below to specify a LF action.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the U or V key to select [LF Action].
4 Press the OK key. LF Action appears.
5 Press the U or V key to select [LF Only], [LF and
CR] or [Ignore LF].
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
CR Action
Set the character return action when the machine receives the character return code (character code 0DH). The
table below shows the available settings. The default setting is CR Only.
Ignore LF No line feed performed.
Item Description
Sys. Menu/Count.:
a
b
7
Copy
*********************
9
Send
[ Exit ]
Printer:
a
b
*********************
2
EcoPrint
3
Override A4/LTR
[ Exit ]
LF Action:
M
b
*********************
2
LF and CR
3
Ignore LF
Item Description
CR Only Only character return performed.
LF and CR Character return and line feed performed.
Ignore CR No character return performed.
To Next Page
Loading...
Need help?
General
