Sending Functions
5-20 OPERATION GUIDE
4 Press the OK key. WSD Scan appears.
5 Press the U or V key to select [From Oper. Panel].
6 Select the destination computer from the computer
list.
Press [Detail] (the Right Select key) to see the
information of the selected computer.
7 Press the OK key to confirm the destination, and
then press the Start key. Transmission starts.
NOTE: To change the destination computer, press the
Back key and then press [Yes] (the Left Select key).
This brings you back to step 6.
NOTE: To use WSD Scan from your computer, press
[From Computer] in step 5 and then scan the original
from the computer.
WSD Scan:
a
b
1
From Computer
*********************
[ Exit ]
Select Computer:
a
b
*********************
P
Computer02
P
Computer03
[ Cancel ] [ Detail ]
Press Start Key.
P
:Computer01
To Next Page
Loading...