Maintenance
9-4 OPERATION GUIDE
6 On the drum unit, slide the main charger cleaner
(green) back and forth 2 or 3 times to clean the
charger wire, then return it to its original position
(CLEANER HOME POSITION ).
IMPORTANT: Remove the fixing tape on the main
charger cleaner before cleaning for the first time.
After cleaning, make sure you restore the main charger
cleaner to its home position.
7 When cleaning is complete, return the drum unit to
the original position.
8 Return the developer unit to its position, aligning
the guides at both ends with the slots in the
machine. Then, close the front cover.
To Next Page
Loading...
Need help?
General
