Troubleshooting
10-12 OPERATION GUIDE
1 Remove the paper jammed at the MP tray.
2 Reload the MP tray. Open and close the top cover
to clear the error and the machine warms up and
resumes printing.
Paper Cassette/Paper Feeder
Follow the steps below to clear paper jams in paper cassette or paper feeder.
1 Pull out the cassette or optional paper feeder.
2 Remove any partially fed paper.
IMPORTANT: Do not try to remove paper that has
already been partially fed. Proceed to Inside the
Machine on page 10-14.
NOTE: Check to see if paper is loaded correctly. If not,
reload the paper.
3 Push the cassette back in securely. The machine
warms up and resumes printing.
Duplexer
Paper is jammed in the duplexer. Remove the jammed paper using the procedure given below.
1 Pull the paper cassette all the way out of the
machine.
To Next Page
Loading...