Utax CD 1128 - Page 52

Preparation before Use
OPERATION GUIDE 2-19
2
4 Press the OK key. The Network Setting menu
appears.
5 Press the U or V key to select [TCP/IP Settings].
6 Press the OK key. The TCP/IP Settings menu
appears.
7 Press the U or V key to select [TCP/IP].
8 Press the OK key. TCP/IP appears.
9 Press the U or V key to select [On] and then press
the OK key.
Completed. is displayed and the screen returns to
the TCP/IP Settings menu.
10 Press the U or V key to select [IPv4 Setting].
11 Press the OK key. The IPv4 Setting menu appears.
12 Press the U or V key to select [DHCP].
Network Setting: a b
*********************
2 NetWare
3 AppleTalk
[ Exit ]
TCP/IP Settings:
a b
*********************
2 IPv4 Setting
3 IPv6 Setting
[ Exit ]
TCP/IP:
a b
1 Off
*********************
TCP/IP Settings:
a b
1 TCP/IP
*********************
3 IPv6 Setting
[ Exit ]
IPv4 Setting:
a b
*********************
2 Bonjour
3 IP Address
[ Exit ]