Utax P-3020 MFP - Setting the Destination

7-14
Status / Job Cancel
Setting the destination
Set the destination to which job log histories are sent.
Use the procedure below to set the destination.
1 In the Job Log History menu, press the  or  key to
select [Destination].
2 Press the OK key. The Destination menu appears.
Confirming Current Destination
1 In the Destination menu, press the  or  key to select
[Confirmation].
2 Press the OK key. Dest. Confirm. appears.
NOTE: Press the OK key to edit/delete the current
destination.Refer to Character Entry Method on Appendix-5
for details on entering characters.
3 Press [Exit] (the Right Select key). The basic screen
reappears.
Job Log History: a b
1 Auto Sending
2 Send History
*********************
[ Exit ]
3 Destination
Destination: a b
*********************
2 Register
[ Exit ]
1 Confirmation
Destination: a b
*********************
2 Register
[ Exit ]
1 Confirmation
Dest. Confirm.: a b
**************** * **** N
[ Exit ]
p Morgan@###########