Utax P-3020 MFP

8-38
Default Setting (System Menu)
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
4 The Timer Settings menu appears.
5 Press the  or  key to select [Sleep Level].
6 Press the OK key. Sleep Level appears.
7 Press  or  key to select [Quick Recovery] or [Energy Saver].
8 Press the OK key.
When [Energy Saver] is selected, Energy Saver appears.
When [Quick Recovery] is selected, Completed. is
displayed and the screen returns to the Timer Setting
screen.
9 Press  or  key to select the condition to be set.
10 Press the  or  key to select [Off] or [On].
11 Press the OK key. Completed. is displayed and the
screen returns to the Energy Saver menu.
Login User Name: L b
*******************
Login Password:
[ Login ]
Timer Setting: a b
*********************
2 PanelReset Timer
3 Low Power Timer
[ Exit ]
1 Auto Panel Reset
Energy Saver: a b
*********************
2 Card Reader
3 FAX
[ Exit ]
1 Network
Sleep Level: a b
*********************
2 Energy Saver
[ Exit ]
1 *Quick Recovery
Network: a b
*********************
2 On
1 *Off