Utax P-3020 MFP

8-78
Default Setting (System Menu)
TonerAlert Level
Set the amount of remaining toner to alert low toner.
The procedure for setting the TonerAlert Level is explained below.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the  or  key to select [TonerAlert Level].
4 Press the OK key. TonerAlert Level appears.
5 Press the  or  key to select [Off] or [On].
6 If [On] is selected and the OK key is pressed, the Toner
Level screen appears.
If [Off] is selected and the OK key is pressed, proceed to
step 8.
7 Press the  or  key or the numeric keys to set the level
at which an alert will be displayed.
8 Press the OK key. Completed. is displayed and the
screen returns to the Common Settings menu.
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
TonerAlert Level: a b
*********************
2 On
1 *Off
Toner Level : L b
(5 - 100)
******** %
5