Utax P-3020 MFP User Manual

8-6
Default Setting (System Menu)
Sound
Set options for buzzer sound during the machine operations.
The table below lists the buzzer types and their settings and details. The asterisk in the table is a default setting.
Use the procedure below to set the buzzer sound for Key Confirmation for example.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the  or  key to select [Sound].
4 Press the OK key. Sound appears.
5 Press the  or  key to select [Buzzer].
6 Press the OK key. Buzzer appears.
7 Press the  or  key to select [Key Confirmation].
Item Value Description
Key
Confirmation
Off, On * Emit a sound when the
control panel are pressed.
Job Finish Off*, On, FAX RX Only
(only on products with
the FAX function
installed)
Emit a sound when a print
job is normally completed.
Ready Off*, On Emit a sound when the
warm-up is completed.
Warning Off, On* Emit a sound when errors
occur.
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
1 Language
2 Default Screen
*********************
[ Exit ]
3 Sound
Sound: a b
*********************
2 FAX Speaker
3 FAX Monitor
[ Exit ]
1 Buzzer
Buzzer: a b
*********************
2 Job finish
3 Ready
[ Exit ]
1 Key Confirmation

Utax P-3020 MFP Specifications

General

Brand	Utax
Model	P-3020 MFP
Category	All in One Printer
Language	English