Utax P-3020 MFP User Manual

8-8
Default Setting (System Menu)
The table below lists the sizes that can be registered.
Use the procedure below to set a custom original size.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the  or  key to select [Orig./Paper Set.].
4 Press the OK key. The Orig./Paper Set. menu appears.
5 Press the  or  key to select [Custom Orig.Size].
6 Press the OK key. Size Entry(Y) appears.
7 Use the numeric keys to enter the paper length (Y).
8 Press the OK key. Size Entry(X) appears.
9 Use the numeric keys to enter the paper width (X).
10 Press the OK key. Completed. is displayed and the
screen returns to the Orig./Paper Set. menu.
Input units Dimensions
Inch models X: 1.97 to 14.02" (in 0.01" increments)
Y: 1.97 to 8.50" (in 0.01" increments)
Metric models X: 50 to 356 mm (in 1 mm increments)
Y: 50 to 216 mm (in 1 mm increments)
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Orig./Paper Set.: a b
*********************
2 Def. Orig. Size
3 Custom PaperSize
[ Exit ]
1 Custom Orig.Size
Size Entry(Y): L b
(1.97 - 8.50)
x ***8.50* "
Size Entry(X): L b
(1.97 - 14.02)
J **14.02* "

Utax P-3020 MFP Specifications

General

Brand	Utax
Model	P-3020 MFP
Category	All in One Printer
Language	English