Utax P-3020 MFP

8-60
Default Setting (System Menu)
File Separation
Select the default file separation setting. The available default settings are shown below.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the  or  key to select [Function Default].
4 Press the OK key. The Function Default menu appears.
5 Press the  or  key to select [File Separation].
6 Press the OK key. File Separation appears.
7 Press the  or  key to select [Off] or [Each Page].
8 Press the OK key. Completed. is displayed and the
screen returns to the Function Default menu.
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
File Separation: a b
*********************
2 Each Page
1 *Off