Utax P-3020 MFP User Manual

8
8-65
Default Setting (System Menu)
6 Press the OK key. The Detail Setting menu appears.
7 Press the  or  key to select [4 in 1 Layout].
8 Press the OK key. 4 in 1 Layout appears.
9 Press the  or  key to select [h Right then Down], [i
Down then Right], [j Left then Down] or [k Down then
Left].
10 Press the OK key. Completed. is displayed and the
screen returns to the Detail Setting menu.
Border Line
Select the default value for border line when [2 in 1] is selected for Combine. Items available for the default value are
as follows:
Use the procedure below to select the default value for border line.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
Detail Setting: a b
*********************
2 4 in 1 Layout
3 Border Line
[ Exit ]
1 2 in 1 layout
4 in 1 Layout: a b
*********************
2 i Down then Right
3 j Left then Down
1 * h Right then Down
Item Description
None No border line.
l Solid Line Draws solid border lines.
m Dotted Line Draws dotted border lines.
n Positioning Mark Puts a mark on the border line position.
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language

Utax P-3020 MFP Specifications

General

Brand	Utax
Model	P-3020 MFP
Category	All in One Printer
Language	English