Utax P-3020 MFP

8
8-67
Default Setting (System Menu)
Use the procedure below to select the default value for the binding edge of the original.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the  or  key to select [Function Default].
4 Press the OK key. The Function Default menu appears.
5 Press the  or  key to select [Detail Setting].
6 Press the OK key. The Detail Setting menu appears.
7 Press the  or  key to select [Orig. Binding].
8 Press the OK key. Orig. Binding appears.
9 Press the  or  key to select [o Left/Right] or
[ p Top].
10 Press the OK key. Completed. is displayed and the
screen returns to the Detail Setting menu.
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
Detail Setting: a b
*********************
2 4 in 1 Layout
3 Border Line
[ Exit ]
1 2 in 1 layout
Orig. Binding: a b
*********************
2 p Top
1 * o Left/Right