8
8-83
Default Setting (System Menu)
5 Press the ļ² or ļ³ key to select [Left] or [Right].
6 Press the OK key. This displays the function selection
screen for the flexible key selected in step 5. The screen
shown is the one when [Left] is selected.
7 Press the ļ² or ļ³ key to select the function you want to
register to the flexible key.
8 Press the OK key. Completed. is displayed and the
screen returns to the Copy menu.
IMPORTANT: If you try to set the function that is registered
to the other flexible key, you cannot set it and This function is
already registered. is displayed.
To Next Page
Loading...
Need help?
General
