Utax P-3020 MFP User Manual

8
8-89
Default Setting (System Menu)
Duplex
Select binding orientation for duplex mode. The table below shows the available settings.
Use the procedure below to select a duplex setting.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the  or  key to select [Duplex].
4 Press the OK key. Duplex appears.
5 Press the  or  key to select [Off], [Bind Long Edge]
or [Bind Short Edge].
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Item Description Finish
Off No duplex mode
Bind Long
Edge
Longer edge
bound
Bind Short
Edge
Shorter edge
bound
Sys. Menu/Count.: a b
5 Common Settings
6 Copy
*********************
[ Exit ]
7 Printer
Printer: a b
*********************
2 EcoPrint
3 Override A4/LTR
[ Exit ]
1 Emulation Set.
Duplex: a b
*********************
2 Bind Long Edge
3 Bind Short Edge
1 *Off

Utax P-3020 MFP Specifications

General

Brand	Utax
Model	P-3020 MFP
Category	All in One Printer
Language	English