Utax P-3020 MFP User Manual

8-102
Default Setting (System Menu)
Destination confirmation screen before transmission
You can specify whether or not the destination confirmation screen appears after the Start key is pressed or after a
destination is added or edited before transmission.
The table below shows the available settings.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Send].
2 Press the OK key. The Send menu appears.
3 Press the  or  key to select [DestinationCheck].
4 Press the OK key. The destination confirmation menu
appears.
5 Press the  or  key to select [Check beforeSend] or
[Check New Dest.].
6 Press the OK key. The menu of the selected function
appears.
The screen when the Check before Send menu is
selected is shown.
7 Press the  or  key to select the desired function.
8 Press the OK key. Completed. is displayed and the
screen returns to the Send menu.
Item Detail
Check beforeSend Specify whether or not the destination
confirmation screen appears before
transmission.
Check New Dest. Specify whether or not the destination
confirmation screen appears when the
destination is new.
Sys. Menu/Count.: a b
6 Copy
7 Printer
*********************
[ Exit ]
8 Send
Send: a b
*********************
2 DestinationCheck
3 Default Screen
[ Exit ]
1 Select Key Set.
DestinationCheck: a b
*********************
2 Check New Dest.
[ Exit ]
1 Check beforeSend
Check beforeSend: a b
*********************
2 On
1 *Off

Utax P-3020 MFP Specifications

General

Brand	Utax
Model	P-3020 MFP
Category	All in One Printer
Language	English