Utax P-3020 MFP User Manual

8
8-167
Default Setting (System Menu)
5 Press the  or  key to select [Basic].
6 Press the OK key. The Basic menu screen appears.
7 Press the  or  key to select [Bonjour].
8 Press the OK key. Bonjour appears.
9 Press the  or  key to select [On] or [Off] and then
press the OK key.
Completed. is displayed and the screen returns to the
Basic menu.
IPSec
Make this setting when you use IPSec. The default setting is Off.
Use the procedure below to make the setting.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2 The System/Network menu appears.
3 Press the  or  key to select [Optional Network].
Basic: a b
*********************
2 TCP/IP Settings
3 Bonjour
[ Exit ]
1 Host Name
Bonjour: a b
*********************
2 On
1 *Off
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]
System/Network: a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit ]
1 Network Setting

Utax P-3020 MFP Specifications

General

Brand	Utax
Model	P-3020 MFP
Category	All in One Printer
Language	English