Utax P-3020 MFP User Manual

8-170
Default Setting (System Menu)
8 Press the OK key. The LAN Interface screen appears.
9 Press the  or  key to select the desired [LAN
Interface].
The available LAN Interface are as follows:
Auto
10Base-Half
10Base-Full
100Base-Half
100Base-Full
1000Base-T
10 Press the OK key. Completed. is displayed and the
screen returns to the Basic menu.
Restart Network
After all network related settings have been done, restart the network card of the device. This is mandatory to make
the settings effective.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2 The System/Network menu appears.
3 Press the  or  key to select [Optional Network].
4 Press the OK key. The Optional Network screen
appears.
5 Press the  or  key to select [Basic].
LAN Interface: a b
*********************
2 10Base-Half
3 10Base-Full
[ Exit ]
1 Auto
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]
System/Network: a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit ]
1 Network Setting
Optional Network: a b
1 Basic
[ Exit ]

Utax P-3020 MFP Specifications

General

Brand	Utax
Model	P-3020 MFP
Category	All in One Printer
Language	English