11
11-27
Management
5 Repeat step 3 to 4 to set items as necessary.
6 Press the OK key again. A confirmation screen appears.
7 Press [Yes] (the Left Select key). The restriction of use
is changed. Registered. is displayed and the screen
returns to Account. List.
Applying Limit of Restriction
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
Use the procedure below to apply the restriction limit.
1 Press the System Menu/Counter key on the main unit
operation panel.
2 Press the ļ² or ļ³ key to select [User/Job Account].
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
NOTE: Refer to Character Entry Method on Appendix-5 for
details on entering characters.
3 The User/Job Account menu appears.
Item Description
Immediately *
* The next job will be prohibited in sending or in storing in the box.
Job stops when the counter reaches its limit.
Subsequently Printing/scanning of the job continues but the
subsequent job will be rejected.
Alert Only Job continues while displaying an alert message.
To Next Page
Loading...
Need help?
General
