2
Preparation before Use
2-35
4 Click Submit.
E-mail Send
Settings
E-mail Size
Limit
Enter the maximum size of E-mail that can be sent in kilobytes. When E-
mail size is greater than this value, an error message appears and E-mail
sending is cancelled. Use this setting if you have set E-mail Size Limit for
SMTP server. If not, enter a value of 0 (zero) to enable E-mail sending
regardless of the size limit.
Sender Address Enter the E-mail address of the person responsible for the machine, such
as the machine administrator, so that a reply or non-delivery report will go
to a person rather than to the machine. The sender address must be
entered correctly for SMTP authentication. The maximum length of the
sender address is 128 characters.
Signature Enter the signature. The signature is free form text that will appear at the
end of the E-mail body. It is often used for further identification of the
machine. The maximum length of the signature is 512 characters.
Function
Defaults
Change the function default settings in [Common/Job Default Settings]
page.
Setting Description
To Next Page
Loading...
Need help?
General
