2NM/2NX/2NY/2NZ/2P0/2P6-1
1-3-63
U600 Init All Data
Description
Initializes software switches and all data in the backup data on the FAX control board, according to
the destination and OEM.
Executes the check of the file system, when abnormality of the file system is detected, initializes
the file system, communication past record and register setting contents.
Purpose
To initialize the FAX control board.
Method
1. Press the start key.
The screen for entering the destination code and OEM code is displayed.
2. Select [Country Code] and enter a destination code using the numeric keys (refer to the desti-
nation code list on following for the destination code).
Display Destination
Country Code Country code.
OEM Code OEM code.
Execute Data initialization starts.
* : OEM code is no operation necessary.
3. Select [Excute] and press the start key.
Data initialization starts. To cancel data initialization, press the stop key.
4. After data initialization, the entered destination, OEM codes and ROM version are displayed. A
ROM version displays three kinds, application, boot, and IPL.
* : When initialization is successful, "Completed" during 1 second is displayed.
* : Where an irregular value is inputted, when it initializes, the following error displays are per-
formed.
Kind of error
Unknown Country (When Country Code is unknown)
Unknown OEM (When OEM Code is unknown)
Unknown Country (When both are unknown)
Destination code list
Code Destination Code Destination
007 Argentina 115 Mexico
009 Australia 126 New Zealand
022 Brazil 136 Peru
038 China 137 Philippines
080 Hong Kong 152 Middle East
084 Indonesia 156 Singapore
088 Israel 159 South Africa
097 Korea 169 Thailand
108 Malaysia 181 U.S.A.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
