2NM/2NX/2NY/2NZ/2P0/2P6
1-3-74
U630 Comm Ctrl 1
Description
Makes settings for fax transmission regarding the communication.
Purpose
The event of a request for user.
Reduce transmission time and the reception of accuracy when using poor quality line.
Improve the accuracy of communication at international communication.
Method
1. Press the start key.
2. Select the item to be set.
Display Description
TX Speed Sets the communication starting speed.
RX Speed Sets the reception speed.
TX Echo Sets the waiting period to prevent echo problems at the sender.
RX Echo Sets the waiting period to prevent echo problems at the receiver.
Setting the communication starting speed
Sets the initial communication speed when starting transmission. When the destination unit has
V.34 capability, V.34 is selected for transmission, regardless of this setting.
1. Select the setting.
Display Description
14400bps/V17 V.17, 14400 bps
9600bps/V29 V.17, 9600 bps
4800bps/V27ter V.27ter, 4800 bps
2400bps/V27ter V.27ter, 2400 bps
* : Initial setting: 14400bps/V17
2. Press the start key. The setting is set.
Setting the reception speed
Sets the reception speed that the sender is informed of using the DIS or NSF signal. When the
destination unit has V.34 capability, V.34 is selected, regardless of the setting.
1. Select the setting.
Display Description
14400bps V.17, V.33, V.29, V.27ter
9600bps V.29, V.27ter
4800bps V.27ter
2400bps V.27ter (fallback only)
* : Initial setting: 14400bps
2. Press the start key. The setting is set.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
