2NM/2NX/2NY/2NZ/2P0/2P6-5
1-4-43
NOTE:
The other F codes are indicated to the appendix (see page 2-3-12).
F051 Scan engine ROM check-
sum error
Control PWB
1. Turn the main power swtch off and after
5 seconds, then turn power on.
2. Confirm that the EEPROM has been
properly installed.
3. Check the control software and upgrade
to the latest, if necessary.
4. If not corrected, Replace the control
PWB and check for correct operation
(see page 2-2-12).
Code Contents Related parts
Check procedures/
corrective measures
To Next Page
Loading...
