4-69
Operation Panel
2 Press [OK]. The Preshared Key screen appears.
3 Press[Edit] ([Right Select]). The Preshared Key entry screen
appears.
4 Enter the Preshared Key using the numeric keys.
5 Press [OK] twice. The Encryption menu reappears.
TCP/IP Settings (TCP/IP Settings for the optional Network Interface Kit)
This selects the TCP/IP settings.
The options available in the TCP/IP Settings are as follows:
• TCP/IP (Enable/Disable TCP/IP)...4-89
• IPv4 Setting (TCP/IP IPv4 settings)...4-90
• IPv6 Setting (TCP/IP IPv6 settings)...4-90
1 In the Wi-Fi Settings menu, press or to select TCP/IP
Settings.
2 Press [OK]. The TCP/IP Settings menu screen appears.
TCP/IP (Enable/Disable TCP/IP)
This specified whether TCP/IP is used.
The method for setting is the same as for the standard Network settings. For details, refer to TCP/IP (Enable/Disable TCP/
IP) on page 4-71.
IPv4 Setting (TCP/IP IPv4 settings)
This selects the settings for TCP/IP (IPv4). The method for setting is the same as for the standard Network settings. For
details, refer to IPv4 Setting (TCP/IP IPv4 settings) on page 4-71.
IPv6 Setting (TCP/IP IPv6 settings)
This selects the settings for TCP/IP (IPv6). The method for setting is the same as for the standard Network settings. For
details, refer to IPv6 Setting (TCP/IP IPv6 settings) on page 4-74.
Note The number of characters is between 8 and 64. For
details on entering characters, refer to Character Entry
Method on page A-2.
TCP/IP Settings:
IPv6 Setting
Exit
03
IPv4 Setting
02
01
TCP/IP
To Next Page
Loading...
Need help?
General
