Preparation before Use
2-38
Loading Paper
The following explains the procedure for loading paper in the cassette and the MP tray.
Loading Paper into the Cassette
The cassettes can hold plain paper, recycled paper or color paper.
Cassette 1 to 5 hold up to 500 sheets of plain paper (80 g/m
²).
For details of the supported paper sizes, refer to Selecting the Right Paper on page A-13. For the paper type setting, refer
to Media Type (Setting the cassette paper type) on page 4-37.
1 Fan the media (paper/transparencies), then tap it on a level surface
to avoid media jams or skewed printing.
2 Pull out the cassette from the machine.
IMPORTANT You should not use inkjet printer paper or any paper with a special surface coating. (Such papers may
cause paper jams or other faults.)
The cassettes can hold paper with weight between 60 - 120 g/m².
Do not load thick paper that is heavier than 120 g/m² in the cassettes. Use the multi purpose tray for paper that is
heavier than 120 g/m².
Place the cassette in a stable place such as on a desk when loading paper.
Note A6 can only be used in Cassette 1 of the P-5031DN/P-5531DN/P-6031DN.
B6 and Postcard cannot be used in Cassette 1 of the P-4531DN.
IMPORTANT When pulling out the cassette from the machine,
ensure that it is supported and does not fall out.
To Next Page
Loading...
Need help?
General
