8-11
Troubleshooting
The Account ID does not match.
Check the registered Account ID.
For more information, refer to Job Account.Set. (Job Account setting) on page
4-140.
This message is displayed when the Job Accounting function is enabled and no
account is set for a transmitted print job or the specified account is not
registered (the incorrect account is set).
To return the printer to the print-ready status, press [OK].
For more information, refer to Job Account.Set. (Job Account setting) on page
4-140.
The user ID entered for a private job is not correct. Check the user ID that you
specified on the printer driver.
The NTLM server rejected the authentication. Enter the correct Login User
Name or Password.
Enter the correct Login User Name or Login Password.
Enter the correct password.
This message is displayed when the Job Accounting function is enabled and an
attempt has been made to exceed the print limit set for each account. To return
the printer to the print-ready status, press [OK].
For more information, refer to Job Account.Set. (Job Account setting) on page
4-140.
Message Corrective Action
Incorrect account ID.
Press [OK].
Incorrect login user
name or password.
Incorrect login user
name or password.
Job is canceled.
Job Accounting
restriction exceeded.
Press [OK].
To Next Page
Loading...
Need help?
General
