Troubleshooting
8-12
The job is canceled. Press [OK].
Current print processing cannot continue because of occurrence of KPDL error.
To print out an error report, display KPDL Error Rpt. from the menu system,
and select On. Press [OK] to resume printing. You can abandon printing by
pressing [Cancel].
If Auto Error Clear is set to On, printing will be automatically resumed after a
preset period of time.
The added box exceeded the maximum number of box.
Delete it if there is a unnecessary box.
For details, refer to Custom Box operation (Box creation, editing and
deletion) on page 5-4.
The size of the paper in the cassette and the paper size on the paper size dial
are not the same. Check the paper size.
No paper in the Bulk Feeder matches the print data. Set paper in the MP tray.
Press [Continue] ([Right Select]) to resume printing.
If you want to print from a different paper source, press [Alt] ([Left Select]) to
display Alternative: and you can change the source for paper feeding. You
can abandon printing by pressing [Cancel].
Message Corrective Action
Job not stored.
Press [OK].
Limit exceeded.
You cannot add any
more.
Load paper in
cassette #.
A4
Different paper
size is set.
Check paper size.
Load paper in
Bulk Feeder.
A4
Plain
To Next Page
Loading...
Need help?
General
