7-3
Maintenance
Replacing the Toner Container
This section explains how to replace the toner containers. When replacing the toner container, always replace the waste
toner box at the same time. If this box is full, the printer may be damaged or contaminated by the waste toner that may spill
over the box.
IMPORTANT Before replacing the toner container, remove the paper on the MP tray.
1 Open the top cover.
2 Turn the lock lever to the unlock position.
3 Carefully remove the old toner container from the printer.
CAUTION Do not attempt to incinerate the Toner Container. Dangerous sparks may cause burns.
Note You do not have to turn printer power off before starting the replacement. Any data that may be processing in
the printer will be deleted if you turn the printer power off.
To Next Page
Loading...
