Troubleshooting
8-10
Remove the paper. Printing then resumes.
An error has occurred on the hard disk. Job is canceled. Press [OK].
The possible error codes and their descriptions are as follows.
01: The amount of data that can be saved at once has been exceeded. Restart
the system or turn the power OFF/ON. If the error still occurs, divide the file into
smaller files. If the error occurs after the file is divided, the hard disk is damaged.
Execute [HDD Initializ.].
04: Insufficient space on the hard disk to complete this operation. Move data or
delete unneeded data.
The Account ID does not match.
Check the registered Account ID.
For more information, refer to Job Account.Set. (Job Account setting) on page
6-110.
This message is displayed when the Job Accounting function is enabled and no
account is set for a transmitted print job or the specified account is not
registered (the incorrect account is set).
To return the printer to the print-ready status, press [OK].
For detail, refer to Job Account.Set. (Job Account setting) on page 6-110.
The user ID entered for a Private/Stored Job is not correct. Check the Access
code that you specified on the printer driver.
For detail, refer to Private/Stored (Printing a Private Print/Stored Job) on page 4-
31.
Enter correct login user name or password.
Enter correct login user name or password.
Message Corrective Action
To Next Page
Loading...
Need help?
General
