UTC Fire and Security Interlogix NX-8E User Manual

Chapter 2: Reporting codes
10 NX-8E Control Panel Installation Manual
Location 44 - Duress code 37
Locations 45 to 50 - Auxiliary outputs programming 37
Location 51 - Autotest control 40
Locations 52 to 55 - Times and days 41
Locations 56 to 83 - 4+2 format communicator codes 42
Location 84 - Daylight saving time 44
Locations 88 to 109 - Partition account codes and features. 45
Locations 110 to 169 - Zone type characteristics 48
Locations 170 to 205 - Zones 49 to 192 51
Location 206 - Auto disarm day selection 55
Location 207 - Serial port selector 55
Locations 208 to 211 - Home automation system 55
Location 212 - LCD keypad address 58

UTC Fire and Security Interlogix NX-8E Specifications

General

Brand	UTC Fire and Security
Model	Interlogix NX-8E
Category	Control Panel
Language	English