PREP
ARATION
Parts Required for Shallow Well Assembly (not included): PVC cement, thread tape,
1-1/4
in. foot valve, (2) 1-1/4 in. male PVC adapters, rigid 1-1/4 in. PVC pipe and couplings, well seal
with vent plug, 1-1/4 in. PVC elbow, 1 in. discharge tee, pressure gauge, 1 in. male PVC adapter,
1 in. female PVC adapter, rigid 1 in. PVC pipe, 1 in. tank cross, (2) 1/4 in. plugs, 1/2 in. drain valve,
10 in. x 1 in. nipple.
Parts Required for Deep Well Assembly (not included): PVC cement, thread compound,
(2) 1 in. female PVC adapters, rigid 1-1/4 in. and 1 in. PVC pipe and couplings, 1-1/4 in. PVC elbow,
1-1/4 in. male PVC adapter, pressure regulator kit (includes ttings, tubing, and 1/4 in. plug), pressure
gauge, (2) male 3/4 in. PVC adapters, rigid 3/4 in. PVC pipe to reach from pump to pressure tank to
service line, tank tee, (2) 1/4 in. plugs, 1/2 in. drain valve, 1-1/4 in. foot valve,1-1/4 in. close nipple,
1 in. x 5 in. nipple,1-1/4 in.
female adapter
, well seal, rigid 1 in. PVC pipe and couplings to reach from
bottom of well to pump (pressure pipe), 1 in. PVC elbow, (2) 1-1/4 in. male PVC adapters, 1 in. x 4 in.
nipple.
GENERAL
PUMP INFORMATION
Typical Pump Setup
Convertible jet pumps are designed for use in these
applications:
1. Shallow wells (0-25 ft. lift) where ejector (B) bolts to
pump (A).
2. Deep wells (0-70 ft. lift) where well inside diameter is
4 in. or more and ejector (B) is installed in the well.
1 in.
Discharge
Pipe
Discharge
Pipe
to
Home
1-1/4 in.
Suction
Pipe
Suction
Lift
Water
Level
1-1/4 in. Male
Adapter
1-1/4 in. Foot Valve
25 ft.
Max.
B
A
1-1/4 in.
Pipe
40 ft.
Max.
1-1/4 in. Foot Valve
1-1/4 in. Pipe
Discharge
Pipe to
Home
1 in.
Discharge
Pipe
1 in.
Pressure
Pipe
1 in.
Suction
Pipe
A
B
Water
Level
Suction
Lift
Lowes.com
4
1
2
B
B
A
A
To Next Page
Loading...
