Utilitech PPTP1 - Troubleshooting Common Issues; Pump Inspection and Troubleshooting Help

7
TROUBLESHOOTING
If the pump is not running properly, remove the 6 impeller cover screws (#1), remove the impeller
cover (#2), and inspect the O-ring (#3) and impeller (#4). If there are any damages to these parts,
please contact 1-800-346-7611.
Note: Do not disassemble the motor housing of the pump. This pump has NO repairable
internal parts, and disassembling may cause a dangerous electrical wiring conditions.
Item
Description
Qty
1
Screw
4
2
Impeller cover
1
3
O-ring
1
4
Impeller
1
5
Shaft
1
6
Washer
1
7
Hose connection
1
7
6
5
4
3
2
1