Check Is there anything obstructing the
platter?
Action Remove all obstacles.
Syndrome When turning on scale, all display
PANEL blank out but only the Zero
and TARE INDICATOR appear
Check Is any load applied to platter when
turning scale on?
Action: Turn scale off. Remove all loads from
platter and turn scale on again.
Check Is the platter inserted properly?
Action: Turn scale off. Insert platter
properly and turn scale on again.
Syndrome Weight and TOTAL COUNT PANEL blank
out during operation
Check Does the load applied to platter
exceed the rated capacity of scale?
Action Remove all loads from platter and
try again.
Syndrome Weighing result is not accurate
Check Is the scale placed in a level
condition?
Action Adjust the adjustable feet to a level
condition.
Check Is the scale affected by airflow,
vibration or RFI?
Action: Place the scale away from all
disturbances.
Check Is the scale calibrated correctly?
Action Contact your dealer.
To Next Page
Loading...
