* To disable the AUTO POWER OFF function
select ¡0-OFF¡
* To employ the AUTO POWER OFF function select
¡4-OFF¡
e. Press ZERO to confirm and return to normal
operation status.
5. INSTRUCTIONS FOR USE
5.1 ZERO THE WEIGHT DISPLAYED WHEN UNLOADED
If ZERO INDICATOR does not appear when the unit
is not loaded, press ZERO to set weight
displayed to zero. Refer to SPECIFICATIONS for
maximum zero range.
5.2 ENTER/CLEAR THE WEIGHT OF A CONTAINER
5.2.1 Enter Weight of a Container
Place a container onto the platter, and then
press TARE to tare off the weight of this
container. After TARE is pressed, zero weight
will be displayed and the TARE INDICATOR
appears.
5.2.2 Clear Weight of a Container from Memory
To clear the weight of the container, remove
the container and all loads from platter and
press TARE, then TARE INDICATOR would
disappear.
5.3 PLACE A LOAD
Always place a load onto the platter gently.
Sudden shock/excessive force may cause
irrecoverable damage to the weight sensor
To Next Page
Loading...
