14
The tanning device is set up to operate on 3 phase operation.
3-Phase Operation (3 x 220V / 60Hz)
4.4 Connecting an external audio source
On the right side of the bed, a connection plate for
an external audio system is located through which
a non-amplified audio signal can be fed.
WARNING : Use only approved external devices to
be connected to audio source. When FUNCTIONAL CONNECTION between the Tanning Bed
and other items to be connected to the equipment can cause the allowable values of
LEAKAGE CURRENT to be exceeded, then safety measures incorporating a SEPARATION DEVICE
shall be applied. Contact PC Tan in case of doubt.
To Next Page
Loading...
