21
7. Tanning mode
The following explanations and functions refer to a tanning device that is fully equipped with all
features.
7.1 Starting the tanning session in remote control timer
mode
Operating and display elements:
[START] button (2-1/2)
[STOP] button (2-1/3)
[+] button(s)
[-] button(s)
Display (2-1/1)
LED
Starting in remote timer-operated mode
1. The unit switches on automatically following the
lead time depending on the used central control
system.
2. If you would like to activate the unit before
the lead time has passed, actuate [START] (2-1/2)
(early start).
3. If you would like to switch off the unit before the set
time has passed, actuate [STOP]
(2-1/3).
During this interruption, the tanning time continues to
run, i.e. the flashing display
(2-1/1) shows the running tanning time.
To Next Page
Loading...