UWE P90 - 11 System Messages

62
11. System messages
11.1 System messages
Code
Specification
E1
Not applicable
E2
E-Eprom Error
E3
Short circuit in temperature sensor
E4
Interrupted temperature sensor
E5
Error in internal I2C-Interface
E6
Remote control signal in private mode or remote control signal
longer active than the maximum tanning time
E7
Error im RAM
E8
Check sum error in ROM
E9
Error in logical program run
EA
Error signal internal main contactor
EE / Eb
Error in watchdog controller
Ed
Circuit card not programmed
EC
Incorrect file download
EF
Confirmation data transmission to watchdog controller is missing
EH
received telegram from watchdog controller is not the original telegram
LA
Change lamps (EVG) or KVG PR10 on 1 or 2 it have to be on 0