33
9.1 Maintenance intervals
Be sure that technical equipment is inspected and serviced regularly. During repair or start-up,
additional measures must be taken to prevent unauthorized access to the safety area.
Only authorized persons may work on the equipment, contact your authorized dealer or
PC Tan Customer Service for further details. Do not do anything which could impair the safety
of the equipment. Order original spare parts only from your specialized dealer or PC Tan. No
liability can be assumed if parts other than the original spare parts are installed.
Inspect and replace as necessary
Kinematik (lift system) bolts and fasteners
Inspect and replace as necessary
Kinematik (lift system) bolts and fasteners
Chassis and associated fasteners
Inspect and replace as necessary
Chassis and associated fasteners
Wiring associated plugs / connections
Inspect and replace as necessary
Inspect and replace as necessary
High pressure filter glass
Inspect and replace as necessary
High pressure lamp holder
Inspect and replace as necessary
High pressure lamp holder
Inspect and replace as necessary
Inspect and replace as necessary
Inspect and replace as necessary
To Next Page
Loading...
