19
- Seek medical advice if persistent swellings or skin sores develop or pigmented moles
change in appearance.
6.1.1 Application tips
When describing the operation, the tanning device is often shown with the canopy open.
During tanning the canopy must always be closed.
Proper operation is not possible with the canopy open.
– Lie down and place your head on the headrest or as indicated by the ergonomic base panel
to maintain the proper distance between skin and lamps.
Preparation time
Before the UV lamps turn on, you have a few minutes to prepare yourself. During the
preparation time you can switch on the UV lamps at any time by pressing the START button.
*Remove your clothes and all jewelry.
*Remove make-up and other cosmetics.
*Remove glasses. Contact lenses can be worn under the protective goggles.
*Put on the protective goggles.
*Lie down on the bed surface.
*Close the canopy.
*Press the START button.
FOR EACH TANNING SESSION
- Always wear the supplied protective goggles.
- Remove cosmetics before the session and do not use any sunscreen.
- Allow for at least 24 hours to pass between sessions.
- After a tanning session in a studio, do not take another sunbath out of doors on the same
day.
6.1.2 How to stop
The tanning session ends automatically after the preset time has run down.
The internal body cooling fan continues to run for approx. four (4) minutes to
sufficiently cool the device.
– To interrupt a tanning session, press the button STOP anytime during a session.
– Press START again to restart the lamps.
To Next Page
Loading...
