Programming vacon • 24
24-hour support +358 (0)40 837 1150 • Email: vacon@vacon.com
5
P5.8.2.2.1.8 SLAVE DEVICE FAILURE
An unrecoverable error occurred while the server (or slave) was attempting to perform the re-
quested action.
P5.8.2.2.1.9 L
AST FAULT RESPONSE
Shows the last fault response as Fault code.
P5.8.2.2.1.10 C
ONTROL WORD
Shows the Control Word received from the bus.
P5.8.2.2.1.11 S
TATUS WORD
Shows the current Status Word that is sent to the bus.
5.4.3.2
Connection 2
The monitoring values are the same as those for Connection 1 (chapter 5.4.3.1), only with a dif-
ferent code (P5.8.2.3.1.X).
To Next Page
Loading...
