Vacon 100 - 8 Quick Setup

Quick setup vacon • 42
24-hour support +358 (0)40 837 1150 • Email: vacon@vacon.com
8
8. QUICK SETUP
Following these instructions, you can easily and fast set up your Modbus for use:
1
Choose control place.
A. Press LOC/REM button on keypad to select
Remote Control Place
B. Select Fieldbus as remote control place: Main Menu > Quick Setup (M1) >
Rem. Ctrl. Place (P1.15) > FieldbusCTRL
2
Make these settings in the master software
A. Set
Control Word to ‘0’ (2001)
B. Set
Control Word to ‘1’ (2001)
C. Frequency converter status is RUN
D. Set Reference value to ‘5000’ (50.00%) (2003).
E.
Actual speed is 5000 (25.00 Hz if MinFreq is 0.00 Hz and MaxFreq is 50.00 Hz)
F. Set
Control Word to ‘0’ (2001)
G. Frequency converter status is STOP.