vacuubrand BVC basic Manual

page 8 of 27
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. 25/11/2013 // 999281
Prior to cleaning and/or decontamination separte BVC control / G and BVC
professional / G from mains.
Prior to restarting allow the device to dry completely.
Awipingandspraydisinfectionispossiblebyusingaethanolbasedsurfacedisinfectant(e.g.,Pursept
A,manufacturer:MerzGmbH&Co.KGaA,Frankfurt/Main,Germany).
Complywithuseandsafetyinstructionsofthemanufacturer!
+ For information about the compatibility with the materials, ask the manufacturer
of the disinfectant.
surface disinfectant on
ethanol basis
External decontamination
The applicability of the decontamination method and the selection of the appropriate
disinfectants have to be ensured by the user.
Priortodecontaminationcleansurfaceswithadampclothifnecessary.Usewateror
a mild detergent as cleaning agent.
NOTICE
NOTICE

vacuubrand BVC basic Specifications

General

Brand	vacuubrand
Model	BVC basic
Category	Water Pump
Language	English