Notes on the documentation 2
0020288452_00 electronicVED Operating instructions 21
2 Notes on the
documentation
▶ Always observe all operating instruc-
tions enclosed with the installation com-
ponents.
▶ Store these instructions and all other
applicable documents for further use.
As an alternative to the manufacturer's
website, these instructions are also avail-
able as a PDF document, see address on
the back page.
These instructions apply only to:
Product article number
Validity: Egypt
OR Egypt
OR Hong Kong
OR Hong Kong
OR India
VED E 18/8 INT II
0010023785
VED E 21/8 INT II
0010023786
VED E 24/8 INT II
0010023787
VED E 27/8 INT II
0010023788
3 Information on the data
plate
Symbol Meaning
The VDE GS mark
confirms that the unit
complies with stand-
ards and has been
tested for safety.
Symbol confirming
conformity with the
electromagnetic com-
patibility standard
Read all of the in-
structions.
Symbol Meaning
Barcode with serial
number,
The 7th to 16th digits
of the serial number
form the article num-
ber
4 CE marking
The CE marking shows that the products
comply with the basic requirements of the
applicable directives as stated on the de-
claration of conformity.
The declaration of conformity can be
viewed at the manufacturer's site.
5 Start-up and operation
5.1 Starting up the product
▶ Only start up the product once the cas-
ing has been completely closed.
5.2 Operating the product
When you open a domestic hot water
draw-off point, the product automatically
switches on and heats up the potable
water.
In accordance with the applicable stand-
ards, the maximum permissible outlet tem-
perature for electric instantaneous water
heaters is 55 °C. The maximum outlet tem-
perature for the product has been restric-
ted to 55 °C.
The product regulates the temperature but
does not regulate the volume of water that
is drawn.
The domestic hot water temperature de-
pends on:
– Water inlet temperature
– Water outlet volume
To Next Page
Loading...
Need help?
General