Vaisala DMT143 - Service Policy; Tools Needed

Procedure Instruction 3(16)
Field Tech Manual for DMT143-series
2018-04-06
Vaisala Instruments
Service policy
Full Calibration service capability in HEL, BOS, TOK and BEI.
Additional three point temperature calibration is available for all models in HEL (MSL).
Customer selectable RH and T points are available in HEL and BOS CRS
Accredited calibration is available for a new unit and the older ones too. Configuration of the
calibration is defined to order form of a new unit
Tools needed
- Power supply (V
Out
10...35V and I
Out
> 1A)
- Standard PC terminal software
- Vaisala USB service cable (order code 219690)
- Multimeters (DVMs)