Vaisala DMT143 - Solving Typical Problems

Procedure Instruction 7(16)
Field Tech Manual for DMT143-series
2018-04-06
Vaisala Instruments
Solving Typical Problems
Some problems can be solved by simply resetting power to the transmitter or issuing the RESET
command using the service port.
Table 2. Troubleshooting Table
If resetting does not help, and if the problem is related to transmitter software or settings, you can
restore the factory configuration of the transmitter by issuing the FRESTORE command. If you are
unable to solve your problem with the transmitter, contact Vaisala technical support.