Chapter 6 ________________________________________________________ Connection Options
VAISALA_______________________________________________________________________ 75
Installing the USB Cable Driver
Before taking the USB cable into use, you must install the USB driver
on your PC. The driver is compatible with Windows 7, Windows 8, and
Windows 10.
To install the USB cable driver:
1. Make sure that the USB cable is not connected.
2. Insert the driver memory stick that came with the cable.
3. When Vaisala USB Device Driver Setup Wizard opens, select
Next.
4. In the Select Additional Tasks window, select the tasks you want
to perform and select Install.
5. Select Display Vaisala USB Device Finder now and select
Finish. The driver is started.
6. Plug in the cable.
Remember to use the correct port in the settings of your terminal
program. Windows recognizes each individual cable as a different
device, and reserves a new COM port.
There is no reason to uninstall the driver for normal use. However, if
you wish to remove the driver files and all Vaisala USB cable devices,
you can do so by uninstalling the entry for Vaisala USB Instrument
Driver from the program manager tool in the Windows Control Panel.
To Next Page
Loading...
