2.3 Uninstall
To uninstall DataLog X2, navigate to the Windows "Control Panel" and select "Remove Program",
DataLog X2 can be selected from the program list and uninstalled.
2.3.1 Starting DataLog X2
To start DataLog X2 use the following methods:
Navigate to the "All Programs" link under the Windows "START" menu
Navigate to the folder "Valeport Software"
Click the icon "DataLog X2"
Alternatively, if during setup you chose to create a desktop icon, locate the icon on the desktop and
double-click to open DataLog X2.
To Next Page
Loading...
